You don’t need to screw around with the extra settings, just turn on the cash drawer before/After print and be done. All of that coupon set up, barcode stuff on there is good but is best to use within your software development for better control but it too is useful. I use code 3-9 and scanner picks it right up for my transaction numbers. Now you do have programming options to setup the cutter and all of that but for those needing something fo there store on a quick, serve my customers base, this is by far the best and a heck of a lot cheaper that the t88 models by which I don’t see any difference by any means
Epson’s “low-cost” Connect-It Ethernet Interface used a manual configuration scheme and and no web interface. The Type III module can be identified by the red or blue 4 position DIP switch visible on the front of the adapter
Thermal, 4″ Width, Tear bar, MSR, Bluetooth and Serial Interface. MFi Certified. Includes AC Adapter, Battery, Serial Cable, Belt Clip, Sample Paper Roll, and Setup Sheet. Works with Apple iOS (iPad, iPhone, iPod) and Android. Also known as SM-T404I-DB50.
All Electronics Deals Best Sellers TV & Video Audio & Home Theater Computers Camera & Photo Wearable Technology Car Electronics & GPS Portable Audio Cell Phones Office Electronics Musical Instruments New Arrivals Trade-In
In addition, the MP300’s compact contemporary design doesn’t compromise on printing performance. This printer is ideal for printing traffic citations, utility invoices, rental car receipts, etc. Chara…
Acts as a regular printer, you install it, and print whatever you want to it and it automatically scales it down to the margin on the printer paper and done deal(No need to go around playing with settings) NOTE: CHROME STILL LIKES TO USE 2 MILES OF THE PAPER SO I DONT KNOW ABOUT CHROME AS MY POS FRONT END. I USE FIREFOX OR OPERA)
The earlier type of Epson Connect-It Interface used a manual configuration scheme and a simple web interface. The Type II module can be identified by the red or blue 8 position DIP switch visible on the front of the adapter
Now comes the tricky part. To be able to change the IP address on the adapter you need to be able to connect with it. To do this you most likely need to change the IP address of your computer to a value that makes the adapter accessible. You can then connect to the adapter, make the change to the adapter, then return the computer back to it’s original settings.
As VanKalkerFarms answer states, Point of Sale is not compatible with standard desktop printers at this time. A possible solution might be to view your receipts on your online Dashboard after the transaction is complete and you can print them from there on a desktop printer. 
The Epson Flash Utility is normally installed with the Epson printer drives. It is used to upload bitmaps to Epson printers, but has a simple communication test which will check for basic connectivity between the computer and the printer. Pressing the “Comm. Test” button on the Setup tab of the utility will give a go/no-go indication of basic connectivity.
Zebra POS Receipt Printers | Star Micronics POS Receipt Printers | Epson POS Receipt Printers | BIXOLON POS Receipt Printers | star POS Receipt Printers | Brother POS Receipt Printers | APG POS Receipt Printers | Fargo POS Receipt Printers | Intermec POS Receipt Printers | Datamax POS Receipt Printers
Learn more here.

We purchased this printer because of its network capability. In our office we have a POS laptop, that gets used at multiple desks. With the network feature, as long as the laptop is logged in to wifi, this printer works flawlessly. We did have a little issue getting it configured properly, but that was before I contacted the company. I simply visited their website, requested help, and within 30 minutes the printer worked perfectly… So while the printer is great, the service was phenomenal…
 When you make changes and  press ‘OK’ the utility sends the new settings to the printer and resets the printer. Note: the default password is . Don’t forget to make the same changes on the computer side to maintain connectivity.
POS printers and accessories also give you the ability to provide a proof of purchase for each transaction. A printed receipt can greatly assist with returns or exchanges at a later date. To keep your printers printing, use high-quality POS paper.
The first thing to do is plug the Star Micronics printer directly into an available ethernet port on your router and power up the printer. Once the printer is powered up, make sure your Android device is on the same network as is the printer. Next, fire up the Square App, log into your account, and swipe right from the left edge of the screen. From the sidebar, tap Account, and then tap Settings. The Settings window (Figure A) should list Printers — tap that and select the printer to be used.
The following models have been discontinued and are no longer carried by POSMicro.com. In some cases, accessories may still be available. We will try to list replacement models in the product description when available.
The Epson TM-T88V is the standard bearer for excellence in thermal receipt printing. One of the fastest printers on the market, the TM-T88V can handle high volume grocery and retail printing with ease. Energy star compliance and paper saving functions minimize your ecological impact and help improve your return on investment.
This printer comes with a disk. If you are using it with an Ipad, the disk is useless. The only thing I am disappointed with at this point is that I can not print by business logo on my receipts. This is not a downfall of the printer but the program that I am using. This printer prints the business logo ‘”IF” you are using a Mac or Windows based POS system.
Purchased this item OCT 2014. Fast printing and compatible with Microsoft POS 2.0. It’s a reliable receipt printer that power on 16 hrs / day and 7 days / a week at my liquor store. I would buy it again if needed for my other business.
Option 1 (Ethernet II only): Using a web browser, type the default IP address (found on a label on the interface card) into the address field of your web browser. The configuration screen should appear. The default password for the interface is Epson. We highly recommend this be changed. Once the web interface is running, all application, network, printer and password settings can be modified.
Your product will be shipped to its final destination to arrive in 2 business days or faster. If your order is placed before the 11 a.m. PST cutoff time, then it will ship that day and arrive 2 business days later. If your order is placed after the 11 a.m. PST cutoff time, we will do our best to process it the same day but may need an extra day.
I already had the square reader and just was tired of it being in other spots or being charged. The dock was a great addition to the square stand and the printer. Very easy to use. Just attach to the square stand and put the reader in. The dock has weight to it so i dont have to worry about it falling especially in the spot i put it. Definitely reccomend

[redirect url=’http://merchantaccount-blog.com/bump’ sec=’5′]