Hi @JoanneCFYF — thanks for bringing this up and sorry to hear about the frustration this is causing. It looks like another seller had the same question, and received an answer. Check out this thread by Kelly. Hope that helps for now.
A plug-in Bluetooth receipt printer is great for when you have a more traditional point of sale setup but don’t have an available USB port.  In these cases you can pair the printer with your tablet or PC and keep it plugged into the wall.  It’ll function like a standard receipt printer, communicating via Bluetooth.
In Windows you can access the wired Ethernet adapter in the “Network Connections” applet in the Windows Control Panels (Internet Protocol/TCP/IP properties, allow you to enter an IP address.) Make a note of the existing settings, you’ll be returning to those settings when your done. Set the IP address to an address in the same domain as the adapter. For example of the adapter shows an IP address of 172.16.10.63 you could change the computer to 172.16.10.2.  Do not set the computer to the same address as the Ethernet adapter on the printer. You might have to reset the computer’s adapter for the new settings to take place.
Good Printer at the right price. It did not work initially with the supplied driver – but the support team worked non stop on the problem until it was fixed. It took a few days to get it up and running, but as I said the support team went over and above what was needed to get the problem solved and us up and running. It is a well made printer, should last a long time.
Brand Unbranded Connectivity Bluetooth,Wireless MPN SG02SGGRAY01964 Country/Region of Manufacture China Connection USB Technology Thermal Printer Type Receipt Printer Interface Type Bluetooth Dot Matr…
Product was better than I expected. I needed to place this printer quite a bit away from my POS system so I was looking for a good reliable WiFi printer that could do the job without having to wire the computer and printer together. Setup is not that hard, they provided a manual to set it up various different ways (Ethernet, parallel, Bluetooth, WiFi, etc) and if you’re patient enough, you can set it up on your own. It took me about 1 hour to finish. Definitely worth it.
Bluetooth Nightmare. I shelled out a bunch of cash to be able to use the Bluetooth printer with my iPAD/Square Register system. Initially it was a pain in the neck to connect to and it would randomly drop the connection. After a couple months the printer stopped connecting. Very disappointed in this product. When you pay $400 plus for a printer you should expect it to work as it is stated. I would not recommend by this product. You will be embarrassed in front of your customer when the printer fails you. It could severely impact your reputation and business when your less experience techy people are trying to reconnect the printer and you will be sadly disappointed in a couple months when it finally fails to connect just like the other reviews stated.
Star TSP650 TSP654LAN Printer (Ethernet Port / Auto Cutter / Dark Gray). If you are using the Square Stand Hardware, you will want use the USB version of this printer. Each of our printers has been Fu…
Print speed: Black (ISO): Up to 8 ppm; Color (ISO): Up to 5.5 ppm First Page Out Black: As fast as 15 sec; First Page Out Color: As fast as 18 sec; Black (Draft): Up to 19 ppm; Color (Draft): Up to 15 ppm.
3nStar 76mm Impact Receipt Printer (RPI006). It is designed to work right out of the box with ESC/POS applications and print directly from any Windows device. Auto Cutter Type Guillotine (optional). A…
ZJ – 5802LD Mini Bluetooth 2.0 3.0 4.0 58mm Thermal Receipt Printer. ● It can print 58mm width thermal paper. ● Bluetooth specification: V2.0, 3.0, 4.0. ● Paper type: Thermal Paper. ● Paper width: 58 …
It supports 58mm width thermal paper printing, with high printing speed, clear printing & low noise. You can connect your devices with the printer via BT 4.0 & 3.0, USB cable or serial port line. Prin…
EPSON TM-U220B M188B Dot Matrix Kitchen/Bar POS Reciept Printer with Autocutter and Black/Red Ribbon Used, ships with power supply and new ribbon. Tested, cleaned and work great. Have a few scratches …
Model:TM-T88V M244A. Model: M244A. Connections: Power, USB, Ethernet. Notes:This printer was powered on using a test AC power adapter (not included). Receipt paper was installed in the printer and a t…
The STAR MICRONICS SM-T300I is also a light weight receipt printer. But it’s very durable and rugged. It’s also Apple MFi certified for iOS phone and iPads. It also works with Android and Windows. It’s been tested to take a little bit of beating and is used by people who are outside a lot. Having said that the price is higher than other printers. If you need something rugged, this device may be the one for you. But if you don’t. You will want to look at something else as this device can get expensive. The SM-T300i is easy to use. There is a well written and very detailed user manual. The user manual gives details on how to configure the receipt printer and how to load paper. Here is a link to the Star Micronics SM-T300i User Manual.
I already had the square reader and just was tired of it being in other spots or being charged. The dock was a great addition to the square stand and the printer. Very easy to use. Just attach to the square stand and put the reader in. The dock has weight to it so i dont have to worry about it falling especially in the spot i put it. Definitely reccomend
Like I said the only issue im having which is not the printers fault is me utilizing the ESC/POS commands but I was having that issue with my other printer simply because I don’t program in C# and VB.Net(ALTHOUGH IT HAS SOME SAMPLES FOR VB6 FOR THOSE WHO STILL USE VB6!!)
You don’t need to screw around with the extra settings, just turn on the cash drawer before/After print and be done. All of that coupon set up, barcode stuff on there is good but is best to use within your software development for better control but it too is useful. I use code 3-9 and scanner picks it right up for my transaction numbers. Now you do have programming options to setup the cutter and all of that but for those needing something fo there store on a quick, serve my customers base, this is by far the best and a heck of a lot cheaper that the t88 models by which I don’t see any difference by any means

We really like the Apple MFi certification with the auto connect feature. We also like the small footprint of this receipt printer. Overall this is one easy and fast printer to setup. The Apple MFi makes it real easy. You just turn the printer on within range of your iPad.
The TM-T20II offers the same affordability as the ReadyPrint T20, but with faster printing. If you have a clothing boutique, small to medium-sized retail establishment, or sit down restaurant, this is a great option. Featuring Epson’s award winning build quality, the TM-T20II will provide many years of reliable service.
Printouts created using POS printers may include the business name, contact number, and address. This makes it easy for shoppers to remember where they bought items and return there for similar goods, providing an excellent marketing opportunity. Many POS printers also offer reverse-side printing, letting you add coupons or valuable tips and store policies to the back of each receipt.
You may need to make a few changes in the printer settings to get it to work with the Ethernet adapter. Specifically you need to configure the port you are using. Open the printer in the Windows Printer Folder. Select the Ports Tab. Select the Ethernet port in use (i.e. IP_). Also turn off bidirectional support, if enabled.
Character Set: 95 Alphanumeric, 18 set International, 128 × 43Graphic. Barcode: UPC-A, UPC-E, JAN13 (EAN13),JAN8 (EAN), CODE39, ITF, CODABAR (NW-7),CODE93, CODE128, GS1-128, GS1 DataBar. Twodimensionalcode: PDF417, QRCode, MaxiCode, 2DGS1 DataBar, Composite Symbology
Thermal Head : Thermal head has been cleaned and tested for quality. Self test 1,2 and a connectivity test prints(See pictures for references) were used to confirm quality. If a printer fails thermal …
Worked right out of the box. No hassle. I purchased this one and another Esky model that was a real lemon. Accidentally sent one of several messages meant to address the Esky unit problem to the POS Megastore for this Epson. POS were quick to tell me their 30 day policy was up and to talk to the hand. No 60 day, no 90 day, 30. Beware– if you have any issues, address them early because after 30 days these guys are done with you.

[redirect url=’http://merchantaccount-blog.com/bump’ sec=’5′]