Good Printer at the right price. It did not work initially with the supplied driver – but the support team worked non stop on the problem until it was fixed. It took a few days to get it up and running, but as I said the support team went over and above what was needed to get the problem solved and us up and running. It is a well made printer, should last a long time.
Why, for God’s sakes, can we not have a receipt that takes up a single page instead of three pages???  I’ve been a customer of square-enabled businesses for at least 4 years, and Square hasn’t come up with a solution for this?  I saw where someone asked this question in April but didn’t get any responses.  Please, please, please?  Is there some setting that everyone else in America is using, but I’m not?  Please help me.
Thermal Head : Thermal head has been cleaned and tested for quality. Self test 1,2 and a connectivity test prints(See pictures for references) were used to confirm quality. If a printer fails thermal …
Tip: You can directly connect a printer with an Ethernet interface to a computer using a crossover cable (not the same as a patch cable). This special cable allows you to bypass using a router or switch to connect a computer to a printer for testing. To use this setup set the IP address of the computer and the printer statically, both in the same sub domain, with different addresses.
More here.

Bluetooth has become a very popular option when it comes to connecting a receipt printer to a PC, tablet, or smart-phone.  It is especially useful when connecting to a device that does not have a full sized USB port such as an iPad. 
Thermal printers offer quiet and fast printing, ideal for retail or restaurant printing. For humid, high temperature environments, such as a kitchen or dry cleaners, we recommend getting an impact receipt printer, as their printouts are more resistant to the elements.
The first thing to do is plug the Star Micronics printer directly into an available ethernet port on your router and power up the printer. Once the printer is powered up, make sure your Android device is on the same network as is the printer. Next, fire up the Square App, log into your account, and swipe right from the left edge of the screen. From the sidebar, tap Account, and then tap Settings. The Settings window (Figure A) should list Printers — tap that and select the printer to be used.
Model MTP – 3. ● Paper width: 80mm. ● Bluetooth host function. ● Instruction set: ESC / POS. ● Paper type: Thermal label paper. Note: Other countries or remote areas may take longer. ● Effective print…
POS-5805DD mini thermal printer is compatible for iOS Android Windows devices, supporting BT(wireless), USB cable and serial port line connection. It can print fast & clearly. Print 58mm wide thermal …
Highest marks on the TSP100III because of the multi-platform adoption and performance. This printer works with Windows, does Star and Epson emulations (set in driver), but the ethernet version is the most commonly used printer with iOS point of sale applications (Star, Shopkeep, Aldelo Touch). Along with it’s 10+ ips print speed it is a great overall printer that will fit most point of sale printing needs.
300mm /second ultra high-speed printing, greatly improve the printing efficiency. – This thermal printer is designed for network and kitchen printing. 58mm and 80mm adjustable printing paper width, 30…
An Ethernet connection uses the existing network to connect the  computer to the POS printer.  The printer plugs into the LAN and, once configured, the computer can use the printer like it was attached directly.
 When you make changes and  press ‘OK’ the utility sends the new settings to the printer and resets the printer. Note: the default password is . Don’t forget to make the same changes on the computer side to maintain connectivity.
Your POS-X Ethernet printer must be connected to a TCP/IP network, either to a router or switch, to which your computer is also connected. Once you have connected the printer, follow these steps to configure it:
Each Epson Ethernet Interface module has a ‘Base’ MAC Address programmed into the it. A unique MAC Address and a Serial Number are programmed into the Flash ROM at the factory, and cannot be changed. Labels with both the MAC address and serial number are affixed to the module. These numbers are important when configuring the adapter- It is advisable to make a note of these values in a secure place.
NOTE: Wait for the green LED on the module to start blinking! If you proceed with this too quickly, the printout will indicate an UNKNOWN PRINTER. If this happens, cycle power, and wait for the Green LED to start blinking. – With the module connected to a Ethernet, this delay will be shorter than if there is no Ethernet connected and the modules spends longer looking for one.
58mm POS Printer 384 line Thermal Dot Receipt 12v USB Printer Set w/ Roll Paper Package Content: 1 x USB Laser Barcode Scanner 1 x Thermal Printer 1 x Fixed mount 1 x Instruction Manual 1 x Printer Dr…
If you purchase this service plan and eligible product for this service plan, you acknowledge that Amazon may send the service plan seller relevant product and price information for the purpose of administering the plan
It has 5 bill trays, 5 coin trays and a bill entry, keeping your money organized and largely improve your working efficiency and accuracy. Electronic Cash Drawer There are 5 bill trays and 5 coin tray…
We carry the complete Epson Receipt Printer line. Each printer ensures long-lasting reliability at fantastic prices. From the industry standard TM-T88V and TM-T20II, Epson Receipt Printers deliver industry-leading dependability, ease-of-use and flexibility for integration into any POS system. Additional printer models, such as the TM-T70II and TM-U220, offer unique features suited for specialty installations.
Just wanted to update this thread with a solution I came across that could work for your multi-page print issue. When you are at your print preview page, there should be a Scale option available (it’s hiding under “More Settings” on Chrome/”More Details” on Safari or Firefox). Reducing the Scale below 100 will reduce the size of the image and you can keep lowering it until it reaches the size you’re looking for.
EOM-POS Thermal Receipt Printer- USB, Ethernet, Serial Ports- Auto Cut – Cash Drawer Port (RJ11/RJ12)- Paper Width 3 1/8″ (80mm) – NOT COMPATIBLE with Mac, Square, Shopkeep, Clover, Shopify, or Paypal

[redirect url=’http://merchantaccount-blog.com/bump’ sec=’5′]