POS-8220 80mm POS Thermal Dot Receipt Printer 300mm/s AUTO-CUT USB/Ethernet/Serial Port. Auto cutter Auto cutter Yes. – With 3 Interfaces: Serial Port,USB,Ethernet. Interface Serial Port,USB, Ethernet…
Arts & CraftsAudio, TV & Streaming MediaBags, Backpacks & BriefcasesBooks & MagazinesCell Phones & AccessoriesCleaning SuppliesCoffee Lovers CenterCoffee, Water, SnacksComputer Accessories & PeripheralsTeacher & EducationFitnessFurnitureGaming
IOS operation system test (APP: blue light). Mini Bluetooth Printer is a portable thermal printer that combines USB, RS-232 Serial and Bluetooth communication interface together. In“Printer-X”will sea…
3nStar 76mm Impact Receipt Printer (RPI006). It is designed to work right out of the box with ESC/POS applications and print directly from any Windows device. Auto Cutter Type Guillotine (optional). A…
You may need to make a few changes in the printer settings to get it to work with the Ethernet adapter. Specifically you need to configure the port you are using. Open the printer in the Windows Printer Folder. Select the Ports Tab. Select the Ethernet port in use (i.e. IP_). Also turn off bidirectional support, if enabled.
Your POS-X Ethernet printer must be connected to a TCP/IP network, either to a router or switch, to which your computer is also connected. Once you have connected the printer, follow these steps to configure it:
The printer is fine but bluetooth connectivity has been an incredible challenge. We have probably wasted 20 hours wrestling with it in the few weeks we have had it. The Starprint utility can say it is not connected when it is … and vice versa. The Bluetooth says it is not connected yet we can print a receipt from the register. The delay communicating via bluetooth means we have to leave a key in teh till drawer rather than wait for it to eventually open even though we have adjusted the utility and timing. So, while the printer is fine, don’t go bluetooth because you can’t use a cable even if you want to as there’s no socket …. just bluetooth ! So, buy a cable printer version and be happier !
Customer displays, available as pole or desktop models, can deliver price information and advertising to a customer at the POS. Customer displays may contain either multi-line fluorescent or LCD displays that connect to your system through a USB, Serial, or Parallel connection. Make it easy for your customers to follow each transaction with the right customer display.
Using the first three segments (also called octets) of your IP address, followed by the numbers 192, type ping followed by this new IP address, then press Enter. That is, if your computer’s IP address is 192.168.1.100, you will type ping 192.168.1.192, then press Enter; if your computer’s IP address is 10.1.10.50, you will type ping 10.1.10.192, then press Enter; and so on.
The configuration report will now print. It should include information such as the MAC address, the IP address and the gateway address. After printing, don’t forget to return DIP switch 1 to the off position.
When a string of characters (known as a MAC Address) appears in the left pane, click it. This will populate the IP, SUBNET Mask, and Gateway fields. Change the values in the IP field to those obtained in step 7 of the Finding an Available IP Address section of this guide.
Thermal Head : Thermal head has been cleaned and tested for quality. Self test 1,2 and a connectivity test prints(See pictures for references) were used to confirm quality. If a printer fails thermal …
Good Printer at the right price. It did not work initially with the supplied driver – but the support team worked non stop on the problem until it was fixed. It took a few days to get it up and running, but as I said the support team went over and above what was needed to get the problem solved and us up and running. It is a well made printer, should last a long time.
Purchased this printer because it was cheaper than others by over $50. Mike helped set it up with the software when the software company would not help me. It works great – similar to Epson and Bixolon but a much better price. Tech support is great – quick response by email, phone and chat.
After launching the software, click Search. Note that if nothing is displayed in the left-hand pane in the Information section after a few seconds, there is most likely an issue with your network which is preventing your computer from communicating with the printer.
Option 1 (Ethernet II only): Using a web browser, type the default IP address (found on a label on the interface card) into the address field of your web browser. The configuration screen should appear. The default password for the interface is Epson. We highly recommend this be changed. Once the web interface is running, all application, network, printer and password settings can be modified.
Nothing in the world couldn’t work out any better than this product. Prints super fast! FYI, don’t expect to have the POS/esc commands in the manual because it tells you that it’s not open to the public but not like google can’t fix that.
saved me a lot of money to replace my old setup. It was easy to install and everything was compatible. No problems at all setting it up. As other viewers said the bill slots are thinner than usual and the drawer has a lot of power/
Fully mobile receipt printers are very useful for on the go receipt printing applications such as deliveries, conventions, or craft fairs.  These mobile printers generally use receipt paper that is 2 inches wide with a smaller core.   Check the printer accessories for compatible thermal receipt paper.
I have been using this printer for a few months and my computer had a few updates and then the printer stop working so I contacted the company’s customer service support through the website (EOM-POS) and Mark help me through the whole process, we were online, connected trying to fix it for about 2 hours, he never gave up and FIXED IT! he tried everything, I even re-started the computer and was able to connect with him until he fixed the issue. CUSTOMER SERVICE IS AWESOME.
Sponsored Products are advertisements for products sold by merchants on Amazon.com. When you click on a Sponsored Product ad, you will be taken to an Amazon detail page where you can learn more about the product and purchase it.
We expanded and I just reordered the last one through Amazon. What came in was the TM-20II. Different power cord than the last one which lead to some wiring problems but overall a much faster printer!!!
USB 56K Voice Fax Data External V.90 V.92 Modem With Dual Ports, Compatible With Windows 98SE/2000/ME/XP/Vista/Win 7 and Support Auto-Dial, Tone and Pulse Dialing, Auto Answer, Auto Retrain (Black Color)
More websites to help.


[redirect url=’http://merchantaccount-blog.com/bump’ sec=’5′]